News

The clutch release bearing is installed between the clutch and the transmission. The release bearing seat is loosely sleeved on the tubular extensi...

The clutch release bearing is a relatively important part of the car. If it is not well maintained and malfunctions, it will not only cause economi...

1. It is strictly forbidden for the car to start at high gear.
2. It is strictly forbidden to lift the clutch pedal sharply.

The drive shaft is an important part of the transmission of power in the automobile driveline. Its function is to transmit the power of the engine ...

The drive shaft is a rotating body with high speed and less support, so its dynamic balance is very important.

The structural design of the shaft is an important step in determining the reasonable shape and overall structural dimensions of the shaft.

Rely on advanced technology, technology, materials and scientific management methods to improve the stability and reliability of the pump;

The actual operating point of the pump is determined by the intersection of the pump's curve and the pump's device characteristic curve.

There are mainly flow and head, in addition to shaft power, speed and necessary cavitation margin. Flow rate refers to the amount of liquid output ...

The impeller is installed in the pump casing and fastened to the pump shaft, which is directly driven by the motor.

The movement of the working parts causes the working volume to periodically increase and decrease to suck and discharge the liquid, and the pressur...

In the production of the chemical and petroleum sectors, most of the raw materials, semi-finished products and finished products are liquids, and t...