The Principle Of Leaf Spring

Apr 20, 2021

Leave a message

When the leaf spring is installed in an automobile suspension and the vertical load it bears is positive, each spring leaf is deformed under force and has a tendency to arch upward. At this time, the axle and the frame are close to each other. When the axle and the frame move away from each other, the positive vertical load and deformation of the leaf spring will gradually decrease, and sometimes even reverse.

The rolling ears of the main film are severely stressed and are weak. In order to improve the stress of the main film rolling ears, the end of the second film is often bent into rolling ears and wrapped outside the main film rolling ears, which is called the wrapping ear. In order to make it possible for each piece to slide relatively when it is elastically deformed, a large gap is left between the rolling ears of the main piece and the wrapping ears of the second piece. In some suspensions, the two ends of the leaf springs are not made into curled ears, but other support connection methods, such as rubber support pads, are used.

The flat rectangular steel plate is in a curved shape. It is a chassis spring made up of several pieces. One end is mounted on the hanger with a tip, and the other end is connected to the beam with a lifting lug, so that the spring can expand and contract. Suitable for medium and large cargo trucks. 


Send Inquiry
you dream it, we design it
Quanzhou Xinlida Machinery Manufactory Co., Ltd
contact us