The damage of the clutch release bearing has a lot to do with the operation, maintenance and adjustment of the driver. The reasons for the damage are roughly as follows:
1) The working temperature is too high to cause overheating
Many drivers often half-depress the clutch when turning or decelerating, and some have their feet on the clutch pedal after shifting; some vehicles have too much adjustment of the free stroke, which makes the clutch disengagement incomplete and in a semi-engaged and semi-disengaged state. A large amount of heat generated by dry friction is transferred to the release bearing. The bearing is heated to a certain temperature, and the butter melts or dilutes and flows, which further increases the temperature of the release bearing. When the temperature reaches a certain level, it will burn out.
2) Lack of lubricating oil and wear
The clutch release bearing is lubricated with grease. There are two ways to add grease. For the 360111 release bearing, open the back cover of the bearing and fill in the grease during maintenance or when the transmission is removed, and then reinstall the back cover. Just close; for the 788611K release bearing, it can be disassembled and immersed in molten grease, and then taken out after cooling to achieve the purpose of lubrication. In actual work, the driver tends to ignore this point, causing the clutch release bearing to run out of oil. In the case of no lubrication or less lubrication, the wear amount of the release bearing is often several to several tens of times the wear amount after lubrication. As the wear increases, the temperature will also be greatly increased, so that it is more vulnerable to damage.
